Is the ball screw also a feed screw?
Do you have this problem?
A ball screw is a feed screw that rotates a ball between the screw and nut. The transmission torque of the present invention is smaller than that of conventional slider screws, and the power of the transmission motor can be saved.
Mobile processing of ball screw
When subjected to an axial load, the ball under the load roller cuts between the threaded shaft and the threaded nut, and returns along the adjacent ball inserted into the guide groove in the nut.
Arrive at the loading area. In this way, the ball will flip. Internal balls ensure low friction when fast, precise and repeated movements are required. Also single ended ball screw and nut with a single screw running the length of the wire. Its torque is greater than that of the moving ball screw and nut. For compatibility, select assemblies with the same pitch and pitch.
The ball screw cap is fitted with a conduit for fastening the balls. Don't remove it until you've got the screw in place. Torque is converted into thrust by turning the ball screw cap. The ball bearing becomes turning, and the screw cap remains radially fixed when slipping on the roller. It is often used in linear slides and linear drives to achieve smooth linear movement.
The characteristics and application of ball screw
Driven by electricity, its energy consumption is low and its power utilization rate is as high as 90%. The ball screw needs to pay attention to: the required working time, the temperature and humidity in the working environment, the required torque, output power, clearance and pollution. Ball and screw caps are used in many industrial fields, such as aviation, computer, electronics, vehicles, industry, etc.